Table of Contents
Advertisement
ON-SCREEN DISPLAY
No.
Item
3
Counter display
E-22
3 2 K C H – 1 / 2
A S S E M
W A R N I N G 7 0 0 1
D R UM MO T O R F A I L U R E
R E C I N H I B I T
0 3 / 0 4 / 0 3
1 1 : 2 0 : 0 0
T C R 0 2 : 0 0 : 0 0 : 0 0
Displays the CTR counter, time code or user's bit. The dis-
played contents can be selected using the COUNTER switch.
• CTL counter: It will be displayed if the COUNTER switch is
• Time code : It will be displayed if the COUNTER switch is
TCG
: Time code generator data
TCR
: Time code reader data
DTCG : Time code data received from the DV IN / OUT
ETCG : External time code generator data
Depending on the framing mode, the symbols for the sec-
onds and frames are different (only for NTSC).
00 : 00 : 00 : 00
• User's bit
UBG : User's bit generator data
UBR
: User's bit reader data
DUBG : User's bit reader data received from the DV IN /
EUBG : External user's bit generator data
Memo
● The position of the counter display can be changed with
COUNTER POSI in the DISPLAY Menu screen.
● The counter display can be turned on/off with TIME
CODE in the DISPLAY Menu screen.
– Status display – (continued)
S P
0
0 0
m i n
S T A N D B Y - O F F
Description
set to CTL. The counter shows a 7-digit
number (hour, minute, second and frame) with
+ or – and "CTL" at the beginning, e.g., CTL-
9:30:20:10
set to TC. The time code shows an 8-digit
number (hour, minute, second and frame)
At playback, the time codes recorded on the
tape are displayed.
The prefix indicates the time code mode.
terminal
Dot (.) for the drop frame mode
¥ Colon (:) for the non-drop frame mode
: it will be displayed if the COUNTER switch is
set to UB.
The user's bit is an 8-digit number (each digit
is a number or character from 0 – F).
The prefix indicates the user's bit mode.
OUT terminal
Advertisement
Table of Contents
