Overview - Cisco ASR 9000 Series Installation Manual

Cisco 100-Gigabit Ethernet CFP Transceiver Modules Installation
Cisco 100-Gigabit Ethernet CFP Transceiver Modules
Installation
This section provides the installation, cabling, and removal instructions for the Cisco 100-Gigabit
C Form-factor Pluggable (CFP) transceiver modules. The modules are hot-swappable input/output (I/O)
devices that connect the system's module port electrical circuitry with either a copper or a fiber-optic
network.
•
•
•
•
•

Overview

The 100-Gigabit Ethernet CFP transceivers are hot-swappable I/O devices that plug into 100-Gigabit
Ethernet module ports
Figure 2-27
1
3
Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide
2-44
Overview, page 2-44
Required Tools, page 2-46
Installing the CFP Transceiver, page 2-46
Attaching the Optical Network Cable, page 2-56
Removing the CFP Transceiver, page 2-49
(Figure
CFP Transceiver
3
2
Captive installation screws
Transmit optical bore, SC connector
Chapter 2 Installing Line Cards in the Cisco ASR 9000 Series Router
2-27).
4
1
2 Optical bore dust plug
4
Receive optical bore, SC connector