8-Port 10-Gigabit Ethernet Modular Port Adapter With Sfp - Cisco ASR 9000 Series Installation Manual

Modular Line Cards and Modular Port Adapters
Table 1-7
LED Label
A/L
STATUS

8-Port 10-Gigabit Ethernet Modular Port Adapter with SFP+

The 8-Port 10-Gigabit Ethernet (GE) modular port adapter (MPA) provides eight cages for SFP+
Ethernet optical interface modules that operate at a rate of 10 Gbps.
The 8-Port 10GE MPA is only supported on the160 Gigabyte Modular Line Card (A9K-MOD160-TR
and A9K-MOD160-SE). It is not supported on the on the 80 Gigabyte Modular Line Card
(A9K-MOD80-TR and A9K-MOD80-SE), or on the Cisco ASR 9001 Router.
Each SFP+ cage on the 8-Port 10GE MPA has an adjacent A/L (Active/Link) LED visible on the front
panel of the card
port, as described in
Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide
1-36
4-Port 10-Gigabit Ethernet Modular Port Adapter LEDs
Color State
Off Off
Green On
Amber On
Off Off
Green On
Amber On
(Figure 1-18). The A/L (Active/Link) LED indicates the status of the associated SFP+
Table 1-8.
Chapter 1 Cisco ASR 9000 Series Line Card Product Overview
Meaning
Port is not enabled.
Port is enabled and the link is up. The MPA A/L
(Active/Link) LED will blink green when there is traffic
activity.
Port is enabled and the link is down.
Modular port adapter power is off.
Modular port adapter is ready and operational.
Modular port adapter power is on and good, and the
modular port adapter is being configured.