2-Port 10-Gigabit Ethernet Modular Port Adapter With Xfp - Cisco ASR 9000 Series Installation Manual

Chapter 1 Cisco ASR 9000 Series Line Card Product Overview

2-Port 10-Gigabit Ethernet Modular Port Adapter with XFP

The 2-Port 10-Gigabit Ethernet (GE) modular port adapter (MPA) provides two cages for XFP Ethernet
optical interface modules that operate at a rate of 10 Gbps. The two XFP modules can be 10GE
multimode or single mode connections
Each XFP cage on the 4-Port 10GE MPA has an adjacent A/L (Active/Link) LED visible on the front
panel. The A/L (Active/link) LED indicates the status of the associated XFP port, as described in
Table
Figure 1-16
1
Table 1-6
LED Label
A/L
1-6, and a Status LED for the MPA as shown in
2-Port 10-Gigabit Ethernet Modular Port Adapter
1
2
A/L (Active/Link) LED
2-Port 10-Gigabit Ethernet Modular Port Adapter LEDs
Color
Off
Green
Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide
(Table A-14).
Figure
2
Status LED
State Meaning
Off Port is not enabled.
On Port is enabled and the link is up. The MPA A/L
(Active/Link) LED will blink green when there is traffic
activity.
Modular Line Cards and Modular Port Adapters
1-16.
1-33