Using The Control Panel; Aligning The Print Head; Using The Print Head Alignment Utility For Windows - Epson L1300 User Manual

User's Guide
E
Follow the on-screen instructions.

Using the control panel

Follow the steps below to clean the print head using the product buttons.
A
Make sure that the transportation lock is set to the unlocked
B
Make sure that no lights are indicating errors.
C
Hold down the H button for three seconds.
The product starts cleaning the print head and the P light begins flashing.
D
When the P light stops flashing, print a nozzle check pattern to confirm that the head is clean.
"Checking the Print Head Nozzles" on page 44
&

Aligning the Print Head

If you notice a misalignment of vertical lines or horizontal banding, you may be able to solve this problem by
using the Print Head Alignment utility in your printer driver.
Refer to the appropriate section below.
Note:
Do not press the + button to cancel printing while printing a test pattern with the Print Head Alignment utility.

Using the Print Head Alignment utility for Windows

Follow the steps below to align the print head using the Print Head Alignment utility.
A
Make sure that no warnings or errors are indicated in the control panel.
B
Make sure A4-size paper is loaded in the rear paper feed.
C
Right-click the product icon on the taskbar, then select Print Head Alignment.
If the product icon does not appear, refer to the following section to add the icon.
"From the shortcut icon on the taskbar" on page 22
&
D
Follow the on-screen instructions to align the print head.
Maintaining Your Product and Software
47
position.