Epson L1300 User Manual page 59

User's Guide
Lights Problem and solution
Waiting for initial ink to charge (Not ready to print)
Initial ink charging may not be complete.
*1 This function is only available for L1300.
*2 In some print cycles a very small amount of surplus ink may be collected in the ink pad. To prevent ink leakage from the pad,
the product is designed to stop printing when the pad has reached its limit. Whether and how often this is required will vary
according to the number of pages you print, the type of material that you print and the number of cleaning cycles that the
product performs. The need for replacement of the pad does not mean that your product has ceased to operate in accordance
with its specifications. The product will advise you when the pad requires replacing and this can only be performed by an
authorised Epson Service provider. The Epson warranty does not cover the cost of this replacement.
Error Indicators
Fill the ink tanks using all of the ink bottles supplied.
Next, turn on the product and press the H button for
3 seconds until the P light starts flashing to start
charging ink. Charging ink takes about 20 minutes.
Wait until the P light stays on.
59