Transporting The Product - Epson L1300 User Manual

User's Guide

Transporting the Product

If you move the product some distance, you need to prepare it for transportation in its original box or one of a
similar size.
c
Important:
❏ When storing or transporting the product, avoid tilting it, placing it vertically, or turning it upside down;
otherwise ink may leak.
❏ When storing or transporting an ink bottle after removing its seal, do not tilt the bottle and do not subject it to
impacts or temperature changes. Otherwise, ink may leak even if the cap on the ink bottle is tightened
securely. Be sure to keep the ink bottle upright when tightening the cap, and take measures to prevent ink
from leaking when you transport the bottle.
A
Open the printer cover and make sure the print head is in the home position on the right.
Note:
If the print head is not in the home position, turn on the product and wait until the print head moves to the far
right position. Then turn off the product.
B
Turn off the product and unplug its power cord.
C
Disconnect the interface cable from the product.
D
Remove all paper from the rear paper feed.
E
Open the printer cover. Secure the print head with a tape, as shown below, then close the printer cover.
Note:
Do not touch the white flat cable and ink tubes inside the product.
Maintaining Your Product and Software
52