Using The Timers - JVC UX-V6V Instructions Manual

Using the Timers

REMOTE CONTROL RM-RXUV6V
DIMMER SLEEP
DISPLAY FM MODE MD/AUX
SLEEP
AUTO
AHB PRO PRESET CD
PROGRAM RANDOM REPEAT
BASS TREBLE TREBLE CANCEL
DIGITAL KEY
ECHO CONTROL
VCD NUMBER
UP
PREV SELECT NEXT
SET
DOWN
VCD NUMBER
ON SCREEN V. INTRO
TUNER
TAPE CD
BAND
VOLUME
The timers let you set your System to turn off automatically, or to
use it like an alarm clock.
Once you have set the daily timer, the System will turn on and off
again at whatever time you select, every day.
In addition to the digital clock, the analog clock also shows the time.
Setting the Clock
• When you plug the AC power cord into the wall outlet, the time
indication blinks on the display.
CLOCK
DOWN MULTI CONTROL
PREV
(for 2 seconds)
1. Press the CLOCK button on the Unit for
more than two seconds.
The time indication rapidly blinks on the display.
4
¢
2. Press the or button on the Unit to set
the time.
¢
Pressing the button moves the time forwards and pressing
4
the button moves it backwards. Hold down the button to
move the time rapidly.
3. Press the CLOCK button.
The selected time is set and the seconds start counting from 0.
Notes:
• The clock must be correctly set for the timers to work.
• The procedure must be completed within two minutes. Other-
wise, the setting is cleared and must be repeated from the
beginning.
CAUTION: If there is a power failure, the clock
loses its setting after about 20 minutes. "0:00"
blinks on the display and the clock must be reset.
Note: The clock may gain or lose one to two minutes per month.
Setting the Daily Timer
Once you have set the Daily Timer, the timer will be activated at the
same time every day. It can be cancelled and re-activate whenever
you wish.
The Timer indicator on the display shows when the Daily Timer you
have set is in effect.
Note: Perform each setting within 30 seconds. Otherwise, setting
is cleared and the procedure must be repeated from the be-
ginning.
AUTO TAPE SELECTOR
REV. KARAOKE VCD
REC MODE MODE/MPX NUMBER
VOLUME
AHB PRO
When the System is in use, the display shows other items as well.
For simplicity, we show here only the items described in this section.
CLOCK
UP
RETURN NEXT
CLOCK
CLOCK
TIMER/
SNOOZE
TIMER/
SNOOZE
Timer indicator
1. Press the % button to turn on the System.
2. Setting the ON time (Example: 12:15).
1. Press the TIMER/SNOOZE button on the Unit.
The Timer indicator lights up and the current ON time
blinks on the display.
• If you have not first set the clock, the "CLOCK" indicator and
the "ADJUST" indicator appear alternately on the display. Set
the clock first.
¢
2. Press the
want the Unit to turn on.
¢
The button moves the time forwards and the
moves it backwards. Hold down the button to move the time
rapidly.
3. Setting the OFF time (Example: 13:15).
1. Press the TIMER/SNOOZE button on the Unit.
The current OFF time blinks on the display.
¢
2. Press the
want the Unit to be turned off.
Pressing the
4
ing the button moves it backwards. Hold down the but-
ton to move the time rapidly.
4. Selecting the music source.
1. Press the TIMER/SNOOZE button on the Unit.
The "TUNER" blinks on the display.
¢
2. Press the
want to listen to.
The display changes as shown below.
Ô
TUNER TUNER REC
beginning)
• If you select the "TUNER REC", the "REC" indicator appears
on the display.
STANDBY/ON
CD
BAND
OPEN/CLOSE
MD/AUX TAPE TUNER CD
SELECT
DOWN MULTI CONTROL UP
¢
PREV RETURN NEXT
4
PHONES
ON time, OFF time
REC indicator
SLEEP indicator
SNOOZE indicator
4
or button on the Unit to set the time you
4
or button on the Unit to set the time you
¢
button moves the time forwards and press-
4
or button to select the music source you
Ô Ô Ô
CD TAPE
4
button
(back to the
20