Various Functions To Enhance Your Enjoyment - JVC UX-V6V Instructions Manual

Various Functions to Enhance
Your Enjoyment
You can use the following features using the Remote Con-
trol.
Frame-by-Frame Playback —————
Frame-by-Frame Playback is possible only when moving pictures
(of the video CDs with or without the PBC function) are played.
During playback, press the CD #¥8 button to pause the
video CD and then press the ¢ button.
Each time you press the ¢ button, the picture advances by one
frame. During Frame-by-Frame Playback, no sound comes out.
To resume Normal Play, press the CD #¥8 button.
• You cannot gain access to the previous frame. (The
is ineffective.)
Display of Operating Status ————
You can view the current operating status on the TV screen.
Press the ON SCREEN button.
Each time you press the button, the on-screen display turns on and
off, and the following screen is shown for three seconds.
Display ON
Music key level
• Once you have turned on the on-screen display, the track
number and playing time are always displayed on the TV
screen. When you play a video CD with the PBC function,
"PBC" will be also displayed on the TV screen.
Viewing the Video Intro of
Video CDs —————————————
You can check the contents of a video CD, watching the first five
seconds of each track on the video CD.
1. Play the video CD.
Video CD with the PBC function:
Perform Continuous Play. (See page 14.)
For example, to start from the beginning, press the ¢ but-
•
ton once to select the track 1 and then press the CD #8 but-
ton.
Video CD without the PBC function:
#¥8
Press the CD button.
2. Press the V.INTRO button after a picture
appears on the TV screen.
The Video Intro Play starts and the first five seconds of nine
tracks are played in sequence.
1
4
7
• If the video CD has more than nine tracks, the tracks whose
track number is greater than nine will be displayed after the
first nine tracks have been displayed.
15
4
button
Display OFF
2 3
5 6
8 9
To select a track during Video Intro Play, press the VCD
NUMBER UP or DOWN button to select the track and then press
the SELECT button. Continuous Play starts from the selected track.
When you use the Unit, press the VCD NUMBER button and press
the VOLUME + or – button to select the track. Then, press the CD
#¥8 button.
To stop and cancel the Video Intro Play, press the
ton.
& 7
but-