Registration of basic information
4.4
Using Web services
It is possible to give a scan command from a computer (Windows Vista/7/Server 2008) on the network or to
perform scanning according to the purpose from the machine and to send the scanned data to the computer.
This section describes settings that should be specified on the computer in advance.
4.4.1
Settings required for using Web services
The following settings are required for using Web services:
-
Install the driver of the machine on the computer.
-
Specify settings for Web services on the machine.
!
Detail
Settings for Web services on this machine can be specified in the Administrator Settings screen. For
details, refer to the User manual – Network Administrator.
4.4.2
Installing the driver of this machine on the computer
Pre-installation checking
Before installation, check that "Network discovery" is enabled in [Network and Sharing Center] accessed
from [Control Panel].
Installation procedure
1
Click the [Start] button, and then select [Network].
Devices connected to the network are listed.
2
Right-click the scanner icon on the machine, and then select [Install].
–
Depending on the settings on the computer, the UAC (User Account Control) dialog box may
appear. Check the contents, and then continue.
–
When both the scan function and the printer function of the Web service are set to "Enable" on this
machine, the machine is displayed as a printer icon.
–
The driver software is installed automatically. When the confirmation dialog box appears, click the
[Close] button.
3
On the control panel of the machine, select [Web Service] and check that the connection destination is
displayed.
bizhub 501/421/361 (Version 2)
4
4-7