Adjusting The Tone; Changing The Display Brightness - JVC 0803AIMMDWJEM Instructions Manual

Adjusting the Tone

You can adjust the bass level (low frequency range) and the
treble level (high frequency range) within a range of "–5" to
"+5" only while the unit is turned on.
• This function only affects the playback sound, and does not
affect your recording.
• This function also affects the sound from headphones.
• There is a time limit in doing the following steps. If the setting
is canceled before you finish, start from step 1 again.
1
Press BASS/TREBLE to adjust the
bass or treble level.
Ex.: When you select "BASS."
2
On the remote control:
Press VOLUME + to increase the
level or press VOLUME – to
decrease the level.
On the unit:
Turn VOLUME + / – control
clockwise to increase the level
or counterclockwise to
decrease the level.
BASS/
TREBLE
Current setting
VOLUME
VOLUME

Changing the Display Brightness

You can change the display brightness only while the unit is
turned on.
On the remote control ONLY:
Press DIMMER while the unit is turned on.
• Each time you press the button, the display
brightness changes as follows:
DIMMER 1
DIMMER 1:
DIMMER 2:
DIMMER OFF: The display and blue illumination
Turning off (on standby) the unit sets the display brightness back to
"DIMMER OFF."
+
–
DIMMER 2
DIMMER OFF
The display illumination dims.
The display illumination dims and the
blue illumination on the display
disappears.
resumes.
DIMMER
12