Citizen CBM1000 TYPE II Service Manual page 9

(4) Assembling Printer Cover SA
• Attach the tear bar by pressing it into printer
cover as shown.
(5) Assembling Power Case SA
• Attach four rubber feet to the power case.
• Set ferrite core position at approx. 200 mm
from the end of power connector.
• Pass power connector through the cable port
in the bottom of power case and fasten as
shown.
• Place the AC adapter in power case.
• Pass tie band through tie band holes in power
case.
• Tuck AC adapter cable in power case and
clamp it with tie band.
Printer cover
Power connector
Rubber foot
Cable routing
Tie band
Ferrite core
5
CBM1000 TYPE II Service Manual
Tear bar
AC adapter
Power case