Citizen CBM1000 TYPE II Service Manual page 3

INTRODUCTION
This manual describes the disassembly, reassembly, and maintenance procedures of the line thermal printer CBM1000
TYPE II. It is intended for field maintenance men.
FEATURES
The CBM1000 TYPE II is a compact-sized, line thermal printer developed for a variety of applications. It has abundant
built-in features, and can be used as a data communication terminal, POS terminal, kitchen terminal and for other
applications. Prior to using the printer, read this manual thoroughly to understand its contents.
1. Paper drop-in mechanism; when supplying or replacing paper rolls, all you have to do is just drop a paper roll
into the printer and close its cover. This will facilitate paper handling and head cleaning greatly.
2. Ease of paper threading and head cleaning.
3. High speed (150 mm/s), and low-noise thermal printing.
4. Front-side paper ejection method, which allows the printer to be installed and used anywhere with few
restrictions.
5. Hermetic covering structure, which helps prevent any foreign matter or liquid from getting into the printer.
6. Built-in input buffer.
7. Bar-code printing (Possible using special commands).
8. Page mode, which allows you to lay out pages freely.
9. Registration of user-defined characters and logos into flash memory.
10. Built-in Drawer Kick-Out interface.
11. Auto cutter mechanism provided as a standard unit.
12. Selection possible, as required, from two types: Easy-to-handle, built-in power supply type, and lightweight flat
AC adapter type.
13. Use of 58 mm wide paper rolls possible by using the partition supplied.
ii
CBM1000 TYPE II Service Manual