Citizen CBM1000 TYPE II Service Manual page 16

(7) Installing Lock Lever
• Pass lock lever-L-SA all the way through the
double fan-shaped hole in the left side of
main chassis and insert its end into another
double fan-shaped hole in the right side of
main chassis.
• Insert lock lever-R-SA on the end of lock
lever-L-SA that protrudes from the right side
of main chassis.
• Press ejector onto the end of lock lever-L-SA.
• Attach EXT spring-02.
(8) Installing Auto Cutter SA
• Attach auto cutter SA in main chassis by
fitting its two bottom projections into the
respective holes.
• Fasten auto cutter SA to main chassis with
two screws (M3 × 6 (ST)).
Main chassis
Lock lever-L-SA
Main chassis
M3 × 6 (ST)
12
CBM1000 TYPE II Service Manual
EXT spring-02
Lock lever-R-SA
Auto cutter SA
Ejector