Configuring The Ip Mode - Cisco RV215W Administration Manual

Configuring Networking

Configuring the IP Mode

STEP 5
STEP 6
Configuring the IP Mode
STEP 1
STEP 2
Cisco RV215W Wireless-N VPN Firewall Administration Guide
Internet IP Address
Status
To test the DDNS configuration, click Test Configuration.
Click Save.
Wide area network configuration properties are configurable for both IPv4 and
IPv6 networks. You can enter information about your Internet connection type and
other parameters in these pages.
To select an IP mode:
Choose Networking > IP Mode.
From the IP Mode drop-down menu, choose one of the following options:
LAN:IPv4, WAN:IPv4
LAN:IPv6, WAN:IPv4
LAN:IPv6, WAN:IPv6
LAN:IPv4+IPv6,
WAN:IPv4
LAN:IPv4+IPV6,
WAN:IPv4+IPv6
LAN:IPv4, WAN:IPv6
(Read-only) Internet IP address of the device.
(Read-only) Indicates that the DDNS update has
completed successfully or the account update
information sent to the DDNS server failed.
Use IPv4 on the LAN and WAN ports.
Use IPv6 on the LAN ports and IPv4 on the WAN
ports.
Use IPv6 on the LAN and WAN ports.
Use IPv4 and IPv6 on the LAN ports and IPv4 on the
WAN ports.
Use IPv4 and IPv6 on both the LAN and WAN ports.
Use IPv4 on the LAN and IPv6 on the WAN ports.
6
52