Viewing Logs - Cisco RV215W Administration Manual

Viewing the Device Status

Viewing Logs

Viewing Logs
Cisco RV215W Wireless-N VPN Firewall Administration Guide
The View Logs page displays the device logs.
To view the logs, choose Status > View Logs.
To display the latest log entries, click Refresh Logs.
To filter logs or specify the severity of logs to display, check the boxes next to the
log type and click Go. Note that all log types above a selected log type are
automatically included and you cannot deselect them. For example, choosing error
logs automatically includes emergency, alert, and critical logs in addition to error
logs.
The event severity levels are listed from the highest severity to the lowest severity,
as follows:
• Emergency—System is not usable.
• Alert—Action is needed.
• Critical—System is in a critical condition.
• Error—System is in error condition.
• Warning—System warning occurred.
• Notification—System is functioning properly, but a system notice occurred.
• Informational—Device information.
• Debugging—Provides detailed information about an event.
To delete all entries in the log window, click Clear Logs.
To save all log messages from the firewall to the local hard drive, click Save Logs.
To save log messages to an external USB device, click Save Log to USB.
To specify the number of entries to show per page, choose a number from the
drop-down menu.
Use the page navigation buttons to move between log pages.
5
22