Viewing the Device Status
Viewing the Guest Network Status
Viewing the Guest Network Status
Cisco RV215W Wireless-N VPN Firewall Administration Guide
The Port Statistics page displays this information:
Interface
Packet
Byte
Error
Dropped
Multicast
Collisions
The guest network statistics displays information about the wireless guest
network configured on the device.
To view the guest network status, choose Status > GuestNet Status. The following
information is displayed:
•
Host Name—Device connected to the guest network.
•
IP Address—IP address assigned to the connected device.
•
MAC Address—MAC or hardware address of the connected device.
•
Time Left—Time remaining that the device can be connected to the guest
network. (Time limits are configured in the Wireless > Basic Settings >
Guest Net Settings page.)
•
Action—Actions you can perform on the connected device (for example,
disconnect).
Name of the network interface.
Number of received/sent packets.
Number of received/sent bytes of information per second.
Number of received/sent packet errors.
Number of received/sent packets that were dropped.
Number of multicast packets sent over this radio.
Number of signal collisions that occurred on this port. A
collision occurs when the port tries to send data at the
same time as a port on another router or computer that is
connected to this port.
5
24