Configuring Dscp Settings - Cisco RV215W Administration Manual

Configuring Quality of Service (QoS)

Configuring DSCP Settings

STEP 4
Configuring DSCP Settings
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
Cisco RV215W Wireless-N VPN Firewall Administration Guide
These values mark traffic types with higher or lower traffic priority depending on
the type of traffic.
Click Save.
To restore the default port-based QoS settings, click Restore Default, and click
Save.
You can use the DSCP Settings page to configure DSCP-to-QoS queue mapping.
To configure DSCP-to-QoS queue mapping:
Choose QoS > DSCP Settings.
Choose the Ethernet or 3G radio button.
Choose whether to only list RFC values or to list all DSCP values in the DSCP
Settings Table by clicking the relevant button.
For each DSCP value in the DSCP Settings Table, choose a priority level from the
Queue drop-down menu.
This maps the DSCP value to the selected QoS queue.
Click Save.
To restore the default DSCP settings, click Restore Default and Save.
10
121