About Relations Between Speaker Layout And Surround/Dsp Modes; Using Surround Modes - JVC RX-ES1SL Instructions Manual

About relations between speaker layout
and Surround/DSP modes
Available Surround/DSP modes will vary depending on how many
speakers are used with this receiver.
Make sure that you have set the speakers information correctly
(see pages 15 to 18).
• If only front speakers are connected, you cannot use the Surround
modes.
• If surround speakers are not connected, you cannot use DSP
modes.
When multi-channel digital software such as Dolby Digital or DTS
Digital Surround is played back, the appropriate multichannel
Surround mode is automatically activated ("DOLBY D" or "DTS") by
pressing SURROUND (with the digital input mode selected).
• For Dolby Digital 2 channel software, you can select "PLII MUSIC"
or "PLII MOVIE" by pressing SURROUND.
• For more details, see "Available Surround/DSP modes for each
input signal" on page 26.
When connecting 5 speakers and 4 speakers
TV
Front Front
Center
Surround Surround
Available Surround modes:
PLII MOVIE (Pro Logic II MOVIE)
PLII MUSIC (Pro Logic II MUSIC)
Available DSP modes:
LIVE CLUB
DANCE CLUB
HALL
PAVILION
ALL CH ST. (All Channel Stereo)
When connecting 3 speakers
TV
Front
Center
Available Surround modes:
PLII MOVIE (Pro Logic II MOVIE)
PLII MUSIC (Pro Logic II MUSIC)
NOTE
When "AUTO SR (Auto Surround)" is turned "ON" (see page 20),
Surround mode is automatically activated when you select and start
playing back a multi-channel digital source.
TV
Front Front
Surround
Surround
Front
Creating realistic sound fields

Using Surround modes

Once you have adjusted the Surround modes, the adjustment is
memorized for each source.
• If you set the speaker information using Smart Surround Setup (see
page 15), you do not have to adjust speaker output level.
When operating this receiver using the remote control,
always set the mode selector to AUDIO/TV/VCR/DBS.
Before you start, remember...
Make sure that you have set the speaker information correctly (see
pages 15 to 18).
From the remote control:
It will be convenient for you to use the
AUDIO SUBTITLE TITLE/GROUP RETURN
remote control for the sound
ZOOM BASS TREBLE
1 2 3
adjustments, since you can make
PROGRESSIVE BASS TREBLE
VFP 4 5 6
adjustments from your listening point,
7 8 9
+
ANGLE TV RETURN 100
and use the test signal.
10 0 +10
REPEAT
3D • For selecting Panorama control for
DIMMER SLEEP ANALOG/DIGITAL CANCEL
INPUT
SMART S. SETUP BASS BOOST A.POSITION
TONE
SURROUND
TEST EFFECT DECODE
SUBWFR CENTER L SURR R
1
Select and play software you like.
If "AUTO SR (Auto Surround)" is set to "ON"
Playing a digital source automatically activates an appropriate
Surround mode. (See page 20.) → Go to step 3 .
2
Press SURROUND to select an appropriate
Surround mode.
• Each time you press the button, the Surround/DSP modes
change as follow:
When playing back multi-channel digital software such as
Dolby Digital or DTS Digital Surround:
L C R
SUBWFR LFE
DOLBY D
LS RS
DOLBY D or DTS
When playing back 2 channel digital software such as
Dolby Digital or DTS Digital Surround:
PLII MOVIE
STEREO
(Surround/DSP off)
When playing back any software other than above:
PLII MOVIE
PLII MUSIC
LIVE CLUB DANCE CLUB
HALL PAVILION
ALL CH ST. STEREO
(Back to the beginning)
CONTINUED ON THE NEXT PAGE
DVD
AUDIO/TV
/VCR/DBS
Pro Logic II Music, use the buttons
on the front panel.
VOL
STEREO
(Surround/DSP off)
PLII MUSIC
(Surround/DSP off)
27