Av Compu Link Remote Control System - JVC RX-ES1SL Instructions Manual

AV COMPU LINK remote control system

The AV COMPU LINK remote control system allows you to operate JVC's video components (TV, DVD player and VCR) through this
receiver.
This receiver is equipped with the AV COMPU LINK-III, which has added a function to operate JVC's video components through the video
components terminals. To use this remote control system, you need to connect the video components you want to operate, following the
diagrams below and the procedures on page 33.
• Refer also to the manuals supplied with your video components.
CONNECTIONS 1: AV COMPU LINK Connection
VCR
AV
COMPU LINK
Monaural mini-plugs
IMPORTANT:
The AV COMPU LINK remote control system cannot control the DBS
tuner connected to the DBS terminals.
NOTES
• When connecting the receiver and a TV with the AV COMPU LINK EX terminal by using a component video cable, you cannot use Automatic
selection of TV's input mode (see page 33).
• When connecting the DVD player or VCR and TV to this receiver, connect it directly to the receiver using cable with monaural mini-plugs.
CONNECTIONS 2: Video Cable Connection
This receiver is equipped with three types of the video terminals—composite video, S-video, and component video, and the signals coming into
this receiver through one type of video terminals can output only through the terminal of the same type. So you need to connect the VCR and TV
to this receiver using one of the following three ways.
• When using the AV COMPULINK remote control system, set the component video input for the DVD player and the DBS tuner correctly (see
"Setting the video component input mode—DVD VIDEO/DBS VIDEO" on page 20); otherwise, the correct input for this receiver will not be
selected on the TV.
CASE 1: When connecting the source equipment
to the receiver through the S-video
terminals, connect this receiver to the
TV's Video Input 1 terminal using S-video
cords.
CASE 2: When connecting the source equipment
to the receiver through the composite
video terminals, connect this receiver to
the TV's Video Input 2 terminal (composite
video input) using composite video
cords.
CASE 3: When connecting the source equipment
to the receiver through the component
video terminals, connect this receiver to
the TV's Video Input 2 terminals
(component video input) using
component video cords.
32
DVD Player
AV
COMPU LINK
Source
Equipment
Source
Equipment
Source
Equipment
Monaural mini-plugs
AV
COMULINK-III
FM 75
AM LOOP FRONT
DVD DVD IN DBS IN MONITOR OUT DIGITAL 3 DIGITAL 1
ANTENNA R L
IN (TV) (DVD)
VIDEO
Y
SUB- DVD DBS VCR
COAXIAL OUT IN
AM EXT AUDIO WOOFER IN IN
CENTER (REC) (PLAY)
VIDEO DIGITAL IN
DIGITAL 2 (DBS)
L P B
MONITOR OUT
CAUTION:
SPEAKER
IMPEDANCE
R P R SUBWOOFER
8 ~ 16
OUT
AV DBS OUT VCR IN TV SURR (REAR)
COMPONENT VIDEO S-VIDEO
COMULINK-III IN (REC) (PLAY) IN RIGHT LEFT
CAUTION:
When connecting the TV with the AV COMPU LINK
remote control system, connect the receiver to the
AV COMPU LINK EX or AV COMPU LINK III
terminal. DO NOT connect the receiver to the AV
COMPU LINK RECEIVER/AMP terminal.
RX-ES1SL
S-video cord
RX-ES1SL
Composite
video cord
RX-ES1SL
Component
video cord
TV
AV
AV
COMPU LINK- ΙΙΙ
COMPU LINK EX
or
CENTER SURROUND FRONT
SPEAKER SPEAKERS SPEAKERS
RIGHT LEFT RIGHT LEFT
S-video cord
To Video Input 1
Composite
video cord
To Video Input 2
(Composite)
Component
video cord
To Video Input 2
(Component)
TV
TV
TV