Setting The Speakers And Subwoofer Information Manually-Manual Setup - JVC RX-ES1SL Instructions Manual

When selecting "MEDIUM ROOM,"
• Center speaker delay time
is set to1 msec.
• Surround speakers delay time
is set to 2 msec.
When selecting "LARGE ROOM,"
• Center speaker delay time
is set to 0 msec.
• Surround speakers delay time
is set to 0 msec.
Setting the speakers and subwoofer
information manually—Manual Setup
You can set the following speakers and subwoofer information
manually as you prefer. When you change your speakers, register the
information again.
• Subwoofer information—SUBWFR
• Speaker size—FRNT SP, CNTR SP, SURR SP
• Speaker delay time—CNTR DL, SURR DL
• Crossover frequency—CROSS
• Low frequency effect attenuator—LFE
• Dynamic range compression—D.COMP
Operating procedure
DIMMER SETTING ADJUST SURROUND
DVD MULTI DVD
STANDBY / ON STANDBY
On the front panel ONLY:
Before you start, remember...
There is a time limit in doing the following steps. If the setting is
canceled before you finish, start from step 1 again.
1
Press SETTING.
MULTI JOG now works for the setting operation.
2
Turn MULTI JOG until the setting item you want
to set appears on the display, then press SET.
• As you turn MULTI JOG, the indication changes as follow:
ANALOG L R
SUBWFR
SUBWFR FRNT SP
CNTR DL
SURR SP
LFE
CROSS
DIGITAL IN AUTO SR
DBS VIDEO
QUICK SETUP
(Back to the beginning)
C
8 feet
(2.4 m)
7 feet
(2.1 m)
C
SOURCE SELECTOR MASTER VOLUME
/ MULTI JOG
SET / TUNER PRESET
DBS VCR TV FM / AM
VOL
CNTR SP
SURR DL
D.COMP
DVD VIDEO
3
Turn MULTI JOG to select the appropriate setting
for the item selected in step 2 , then press SET.
9 feet
Your setting is stored.
(2.7 m)
ANALOG
L R
EX.: When selecting "NO" for "SUBWFR."
4
If you would like to set other items, repeat steps
2 and 3 .
10 feet
(3.0 m)
Setting the subwoofer information
— SUBWFR (subwoofer)
Register whether you have connected a subwoofer or not.
YES*: Select when you have connected a subwoofer.
The subwoofer speaker indicator (
on the display (see page 14). You can adjust the
subwoofer output level (see page 21).
NO: Select when you have not connected or have
disconnected a subwoofer.
* Initial setting
Setting the speakers size
— FRNT SP (front speakers), CNTR SP (center
speaker), SURR SP (surround speakers)
Register the sizes of all the connected speakers.
LRG (large): Select when the cone speaker size is larger than
4 3 /
4
SML (small)*: Select when the cone speaker size is smaller than
PHONES
4 3 /
4
NO: Select when you have not connected a speaker. (Not
selectable for the front speakers.)
* Initial setting
NOTES
• If you have selected "SML (small)" for the front speaker size, you
cannot select "LRG (large)" for the center and surround speaker
sizes.
• If you have selected "NO" for the subwoofer setting (see above and
page 16), you can only select "LRG (large)" for the front speaker
size.
Speaker settings
SUBWFR
inches (12 cm).
inches (12 cm).
CONTINUED ON THE NEXT PAGE
VOL
) lights up
17