Disassembly
3.6
Lower Front Cover Assy
Close the slider.
Remove the seven Screws Other Len:1.6 Diam:1.4 using a
screwdriver with Bits (JCIS No 0).
Scrap! Not to be reused!
Gently separate the adhesive area using fingers between
the Hinge FPC and Lower Front Cover Assy.
Do not stretch the Hinge FPC!
Remove the Lower Front Cover Assy by threading the Hinge
FPC through the hole.
3.7
Hinge Assy &
Touch/Display Front Cover
Assy
Pierce the center of the Screw Cap by using a pair of
tweezers, and then remove it.
1251-8382 Rev 2
©
Sony Ericsson Mobile Communications AB – Company Internal
Working Instructions (mech)
13(85)