Specifications - JVC RX-7000VBK Instructions Manual

Specifications

Amplifier
Audio
Audio Input Sensitivity/Impedance (1 kHz):
Audio Input (DIGITAL IN)* :
*Corresponding to Linear PCM, Dolby Digital, and DTS Digital Surround (with sampling frequency — 32 kHz, 44.1 kHz, 48 kHz).
Audio Output Level:
Signal-to-Noise Ratio ('66 IHF/'78 IHF):
Frequency Response (8 )
RIAA Phono Equalization:
Video
Video Input Sensitivity/Impedance:
Video Output Level:
Signal-to-Noise Ratio:
On-Screen Color System:
Output Power
At Stereo operation:
Front channels:
At Surround operation:
Front channels:
Center channel:
Rear channels
PHONO (MM):
CD, TAPE/MD, TV SOUND/DBS, VCR, DVD:
Coaxial: DIGITAL 1 (DVD):
Optical: DIGITAL 2 (CD), DIGITAL 3 (TV):
TAPE/MD, VCR:
Digital output: Optical: DIGITAL OUTPUT
PHONO:
CD, TAPE/MD, TV SOUND/DBS, VCR, DVD:
PHONO:
CD, TAPE/MD, TV SOUND/DBS, VCR, DVD:
±1.0 dB (20 Hz to 20 kHz)
Bass boost: +6 ±1.0 dB at 100 Hz (Volume control at –30 dB)
SEA: Center frequencies:
Control range:
Composite video: TV SOUND/DBS, VCR, DVD:
S-video: TV SOUND/DBS, VCR, DVD: (Y: luminance):
Composite video: VCR, MONITOR OUT:
S-video: VCR, MONITOR OUT:
Synchronization: Negative
45 dB
NTSC
110 W per channel, min. RMS, driven into 8 , 20
Hz to 20 kHz with no more than 0.06% total
harmonic distortion.
100 W per channel, min. RMS, driven into 8
more than 0.8% total harmonic distortion.
100 W, min. RMS, driven into 8
0.8% total harmonic distortion.
100 W per channel, min. RMS, driven into 8
more than 0.8% total harmonic distortion.
Signal wave length: 660 nm
Output level: –21 dBm to –15 dBm
100 Hz, 1 kHz, 10 kHz
±10 dB ±2 dB
(C: chrominance, burst): 0.286 V(p-p)/75
(Y: luminance):
(C: chrominance, burst): 0.286 V(p-p)/75
at 1 kHz with no
at 1 kHz, with no more than
at 1 kHz, with no
2.5 mV/47 k
200 mV/47 k
0.5 V(p-p)/75
–21 dBm to –15 dBm (660 nm ±30 nm)
200 mV
70 dB/78 dB (at REC OUT)
92 dB/80 dB
20 Hz to 20 kHz (±1 dB)
20 Hz to 20 kHz (±1 dB)
1 V(p-p)/75
1 V(p-p)/75
1 V(p-p)/75
1 V(p-p)/75
49