Available Dsp Modes According To The Speaker Arrangement - JVC RX-7000VBK Instructions Manual

Available DSP Modes According to the Speaker Arrangement

Available DSP modes will vary depending on how many speakers are used with this receiver.
Make sure that you have set the speaker information correctly (see page 14).
Speaker arrangements
TV
Front
speaker
TV
Front
speaker
Center speaker
TV
Front
speaker
Rear
speaker
TV
Front
speaker
Center speaker
Rear
speaker
Each time you press DSP MODE on the front panel or SURROUND MODE on
the remote control, the DSP modes change as follows:
Front
speaker
• 3D THEATER
• LIVE CLUB
• DANCE CLUB
• HALL
• PAVILION
• 3D ACTION
• DSP OFF (DSP mode is canceled)
Each time you press DSP MODE on the front panel or SURROUND MODE on
Front
the remote control, the DSP modes change as follows:
speaker
By pressing DSP MODE:
• THEATER
• LIVE CLUB
• DANCE CLUB
• HALL
• PAVILION
• 3D ACTION
• DSP OFF (DSP mode is canceled)
Front
speaker
To activate the Surround
mode, press SURROUND ON/
OFF button so that the lamp on
the button lights up.
Rear
speaker
* Activated automatically only when "AUTO/PCM" is selected as the digital input
and playback source is encoded with Dolby Digital.
** Activated automatically only when "AUTO/PCM" is selected as the digital input
Front
and playback source is encoded with DTS Digital Surround.
speaker
Notes:
• If Surround mode is canceled while playing back a multichannel source such as
Dolby Digital and DTS Digital Surround, all channel signals are mixed with left
and right front channel and are output through the front speakers.
• While playing back a multichannel source such as Dolby Digital and DTS Digital
Rear
Surround, Theater Surround, DAP modes, and 3D-PHONIC modes cannot be
speaker
used. On the other hands, if you select a Dolby Digital and DTS Digital
Surround as the source to play while using any of Theater Surround, DAP
modes, and 3D-PHONIC modes, the currently selected mode will be canceled
and Dolby Digital or DTS Digital Surround mode will be activated.
Available DSP modes
By pressing SURROUND MODE:
• DOLBY/DTS SURROUND
(DOLBY PRO LOGIC, DOLBY
DIGITAL*, or DTS SURROUND**)
• THEATER
• LIVE CLUB
• DANCE CLUB
• HALL
• PAVILION
• 3D ACTION
• DSP OFF (DSP mode is canceled)
To activate the Surround
mode, you can also use the
SURROUND ON/OFF button.
23