Diagnostic Menus - Table - Precor EFX 885 Service Manual

Diagnostic Menus - Table

Test Type
At the Banner press PAUSE/RESET,
ENTER, PROGRAMS, INPUT
Diagnostic
DOWN, INPUT UP, ENTER,
Software
INPUT DOWN, INPUT UP, and
Press the GO key to select the test.
Press the GO key to start the test.
Beeper Test
Press the ENTER key to stop the test.
Press the WORKOUTS/PROGRAMS
Press the  key to go to the next test.
Keyboard Test
Press the  key to go to the next test.
Press the GO key to select the test.
LCD Test
Press the WORKOUTS/PROGRAMS
Press the  key to go to the next test.
Heart Rate
Test
Press the GO key to select the test.
Press the WORKOUTS/PROGRAMS
key to exit the Heart Rate test.
Press the  key to go to the next test.
You may now proceed to the BRAKE
test, RPM test, BATTERY test,
STRIDE POSITION test, or STRIDE
COUNT RESET. Press the , key
until the desired test is displayed.
Press the  key to go to the next test.
Press the GO key to select the test.
Press the WORKOUTS/PROGRAMS
Machine Test
Press the  key to go to the next test.
Press the GO key to select the test.
Press the WORKOUTS/PROGRAMS
Press the  key to go to the next test.
©2011 Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law
Action
PROGRAMS sequentially.
key to exit the beeper test.
Press the GO key.
key to exit the LCD test.
key to exit the Brake test.
key to exit the RPM test.
BEEPER TEST will be displayed.
The display will prompt the user to test the beeper sound.
This test will send an audible sound to the speaker mounted in the headphone jack.
KEYBOARD TEST will scroll across the display.
A representation of all of the keys on the console will be displayed. Pressing a
key on the console will cause the illuminated representation of that key to turn
off. Press all of the keys on the console to ensure that all of the keys are
functioning. The keyboard test will exit when all the keys have been pressed.
LCD TEST will scroll across the display
The unit will test all the different sections of LCD display screen then all sections
on, advancing through each section. Check the display to ensure that all LED
segments are illuminated.
HEART RATE TEST will scroll across the display
Grasp both of the heart rate grips on the handlebar, after a couple of seconds the
heart rate will be displayed in the heart rate and smart rate displays.
Use chest strap transmitter or a wireless heart rate transmitter to test the
wireless heart rate function, after a couple of seconds the heart rate will be
displayed in the heart rate and smart rate displays.
MACHINE TEST will scroll across the display.
BRAKE TEST will scroll across the display.
The brake power bits information will be displayed in the Distance Field. This
information is used to help diagnose problems with the Eddy Current Magnet.
RPM TEST will scroll across the display.
Rotation count is determined by a zero crossing from one phase of the generator
and is represented as RPM in service mode. The count in service mode is real
time and should go to zero if you quit pedaling, which can help diagnose stride
count irregularities.
BATTERY TEST will scroll across the display.
EFX 885, 835, 825
Service Manual 20039-166
Description
Page 95