Installing The Roof Panel - Chevrolet 2008 Corvette Owner's Manual

Press down firmly to seat the pins in the receivers.
2-60
2. Insert the roof panel so
that the outside front
edges line up between
the receiver covers.
Push forward on
the roof panel until
it stops.
3. Gently place the roof
panel down so that the
back pins on the
roof panel drop into the
receivers in the back
of the storage area.

Installing the Roof Panel

CAUTION:
{
An improperly attached roof panel may fall into
or fly off the vehicle. You or others could be
injured. After installing the roof panel, always
check that it is firmly attached by pushing up
on the underside of the panel. Check now
and then to be sure the roof panel is firmly in
place.
Notice: If you drop or rest a roof panel on its
edges, the roof panel, paint and/or weatherstripping
may be damaged. Always place the roof panel in
the stowage receivers after removing it from
the vehicle.