Air Service Search; Air Service Search Skip - Uniden UBC3300XLT Owner's Manual

Air Service Search

The Air Service Search feature allows you to scroll through
the preprogrammed services.
1. Press AIR/STEP.
––– OR –––
Another method is as follows:
To set Air Service Search, enter into the Menu mode.
1. Press MENU/BACK.
2. Select 1:SERVICE OPTION by
rotating the VFO and pressing E.
3. Select 1:AIR by rotating the VFO
and pressing E.
Note: • You can not change such settings as Auto Delay,
during an Air Service Search.
• You can enter one of the Air Service Search
frequencies into Channel Memory by pressing
TRNSFR when holding on one of the frequencies
and pressing E.
• When you rotate the VFO while the Air Service
Search is active, you can change the search direc-
tion to up or down.
To stop the search, press HOLD/MAN. Rotate the VFO to
move up or down one programmed frequency or press RSM
to resume searching. When the unit is in the air service
search, a user can change the frequency step for air band
between 12.5kHz and 8.33kHz by pressing the AIR/STEP.

Air Service Search Skip

You can set the scanner to skip the unwanted frequencies
during Air Service Search. 100 skipped frequencies are
programmable.
1. To skip over a frequency, press L/O when stopping at the
frequency you want to skip.
2. To cancel a skip during search, press HOLD/MAN, select
the desired frequency by rotating the VFO, then press
L/O.
SERVICE OPTION
1:AIR
2:CHAIN SEARCH
43