Air Service Search; Using Aircraft Service Search; Air Service Search Skip; Changing The Step - Uniden UBC785XLT Owner's Manual

UB343ZH_UBC785XLT_OM_0622

Using Aircraft Service Search

You can search the aircraft frequencies by pressing AIR. If the scanner stops on an
frequency, you can resume searching by pressing RSM.
Note: When you rotate the VFO while the Air Service Search is active, you can change the
search direction to up or down.

Air Service Search Skip

You can set the scanner to skip the unwanted frequencies during Air Service Search. 100
skipped frequencies are programmable.
1. To skip over a frequency, press L/O when stopping at the frequency you want to skip.
2. To cancel a skip during search, press L/HOLD or LIMIT /M, select the desired
frequency by rotating the VFO or using L or M, then press L/O.
To restore all skipped frequencies, press and hold L/O for
2 seconds.

Changing the step

You can choice the step of Aircraft Service Search between 12.5 kHz or 8.33 kHz.
To change the step:
1. Press [MENU].
2. Select 1:SERCH OPTION / 1:AIR STEP by rotating the VFO and pressing E.
3. Select 12.5kHz or 8.33kHz, then press E.
6/22/06 3:01 PM

Air Service Search

39
Page 39
SRVC
118.0250 AM
SERVICE SEARCH
AIR
12.5k