Searching For Active Frequencies; Using Limit Search; Programming An Upper/Lower Limit; Searching The Selected Range - Uniden UBC330CRS Owner's Manual

Searching for Active Frequencies

Many people enjoy searching for the unknown frequencies that are in use in their
area but are not posted to any site or in any publication. The UBC330CRS has
two ways to search: Limit searching that searches between two set frequencies
and Service Searching that searches for specific types of services.

Using Limit Search

Programming an Upper/Lower Limit

Follow these steps to program an Upper and Lower limit for the limit search:
SEARCH
1. Press
frequency.
2. Enter one of the range limits, then press
Press or
s t

Searching the Selected Range

After entering the limits (or use the default limits), press
starts searching from the lower range up to the higher range.
To change the direction of the search, press

Using Service Search

You can select any of Police, Marine, Rail Road, AM-CB and UHF-CB channels
for active frequencies in your area.

Selecting a Service to Search

SVC
Press to enter the service search mode, then press the button
corresponding to the service you want to search. When the scanner
stops on a transmission, you can force it to resume searching by pressing
or .
s t
HOLD
then . The scanner holds on the current search
then enter the other range limit , and press
E/PGM
or
s
Searching for Active Frequencies
.
E/PGM
SEARCH
.
t
.
. The scanner
24