Setup; Installing The Battery Pack; Charging The Battery Pack; Low Battery Indicator - Uniden UBC3300XLT Owner's Manual

Installing the Battery Pack

1. Open the cover.
2. Connect the battery pack connector
observing the correct polarity.
3. Replace the cover and press down
until it clicks into place.

Charging the Battery Pack

Use the AC Adapter/Charger
to power the UBC3300XLT
from an AC outlet.
You can use your scanner
while the battery charges.
To fully charge the battery,
leave the AC Adapter/Charger
connected for 14 — 16 hours.
Note: Disconnect the AC Adapter/Charger from the unit when
charging is complete.

Low Battery Indicator

When the battery pack is low and needs to be charged,
appears on the display. You will also hear a beep every 15
seconds as an audible alert.

Setup

Use only the supplied AC Adapter
13
CH/
FRQ
RSM
HOLD/
MAN
TRUN K
MEN U/BA CK
L/O
SEL ECT
REV ERS E
MUT E