Handling And Storing Srx5600 And Srx5800 Services Gateway Cards; Srx5600 And Srx5800 Services Gateway Card Terminology - Juniper SRX5600 User Manual

SRX5600 and SRX5800 Services Gateway Card Guide

Handling and Storing SRX5600 and SRX5800 Services Gateway Cards

SRX5600 and SRX5800 Services Gateway Card Terminology

Related
Documentation
30
SRX5600 and SRX5800 Services Gateway Card Terminology on page 30
Handling an SRX5600 or SRX5800 Services Gateway Card on page 31
Storing an SRX5600 or SRX5800 Services Gateway Card on page 33
Regardless of orientation, this information uses the same terms for all four edges of the
card (see Figure 21 on page
Faceplate—Edge of the card that has connectors to which you connect cables or
sockets in which you insert SFP or XFP transceivers.
Connector edge—Edge opposite the faceplate; this edge has the connectors that attach
to the midplane.
Top edge—Edge at the top of the card when it is vertical.
Bottom edge—Edge at the bottom of the card when it is vertical.
NOTE: This terminology applies to SPCs, IOCs, and SCBs in addition to
Routing Engines and port modules.
Figure 21: Card Edges
Cards Supported on SRX5600 and SRX5800 Services Gateways on page 2
30):
Copyright © 2013, Juniper Networks, Inc.