Using The Remote Control To Control Your Other Devices - Toshiba 40G30U Owner's Manual

Using the remote control to
control your other devices
If you have a non-Toshiba device or a Toshiba device that
the remote control is not preprogrammed to operate, you
must first program the remote control to recognize the
device (if you have not already done so) ( pages 25–27).
To use your TV remote control to operate a:
Cable converter box or satellite receiver, set the
MODE SELECT switch to CABLE/SAT.
VCR, set the MODE SELECT switch to AUX 1.
DVD player or HTIB, set the MODE SELECT
switch to AUX 2.
Note: Even after the TV remote control is
programmed, it may not operate certain
features on any other devices. If this happens
and you wish to use those features, you will
need to use the device's original remote control.
Point the remote control
directly at the device.
16
17
18
19
Chapter 3: Using the remote control
1 POWER Turns the selected device on and off.
2 Channel Numbers (0-9) Press to directly access
3 +10 Press to directly access DVD chapters higher than
4 TOP MENU Accesses a DVD's top menu.
5 CH ST For channels programmed into the channel
6 GUIDE Displays the channel guide in the CABLE/SAT
7 INFO Displays TV status information on-screen.
8 STWX Press to navigate DVD menus (may not work
9 ENTER Required by some satellite receivers and DVD
10 DVD CLEAR Press to reset the title and chapter number.
11 PLAY Begins playback of a tape or DVD.
12 PAUSE Press during play or record mode to pause the
13 STOP Stops the tape or DVD.
14 SKIP
15 FF Fast-forwards the tape or DVD. (Press during play
16 SKIP
17 REW Rewinds/reverses the tape or DVD. (Press
18 TV/VCR To view one program while recording another,
19 REC Starts tape recording.
20 MODE SELECT switch Set to "TV" to control the TV;
channels (as opposed to
10.
memory (  page 31):
S selects the next higher channel.
T selects the next lower channel.
mode.
SET UP Accesses a DVD's setup menu in the AUX
mode.
on some DVD players).
players to activate certain functions.
picture; press again to restart.
Skips forward to locate later DVD chapters.
mode to view the picture moving rapidly forward.)
Skips back to beginning of current DVD
chapter, or locates previous chapters.
during play mode to view the picture moving rapidly
backward.)
press to select TV mode.
SEARCH selects a specific DVD chapter, title or time.
"CABLE/SAT" to control a cable converter box or
satellite receiver; "AUX 1" to control a VCR; "AUX 2"
to control a DVD player or HTIB.
).
23