2.
DISC
DISC
DISC
3.
4.
SET
/
5.
6.
Using the Remote Control
1.
PROGRAM
/ RANDOM
2.
DISC
DISC
DISC
24
Select a disc with the DISC buttons (1 to 3).
The display changes to the Program Entry display and the disc number and track number
sections blink for a few seconds.
While the display is blinking, perform the operations in steps 3 to 4. When the blinking
display changes to the "PROGRAM" display, repeat the operations in steps 2 to 4.
Select a track for the program by adjusting the MULTI CONTROL stick left or right.
The track number appears on the display.
Press the SET/DEMO button.
The blinking disc number and track number changes to a steady light, and the step number is
displayed.
Repeat steps 2 to 4 to select the other tracks for the program.
To select another track from the same disc, repeat the procedure from step 3.
Press the ‹
‹
‹
‹ /8 8 8 8 8 (SELECT) button.
‹
The Unit plays the tracks in the order you have programmed them.
Press the PROGRAM/RANDOM button on the Unit.
The message "PROGRAM" appears in the display and the PROGRAM indicator comes on.
If you have already created a program, the last step of the previous program is displayed.
The display changes with each press of the PROGRAM/RANDOM button, as shown below.
PROGRAM
RANDOM
Select a disc with the DISC buttons (1-3) on the Remote Control.
The display changes to the Program Entry display and the disc number and track number
sections blink for a few seconds.
While the display is blinking, perform the operations in step 3. When the blinking display
changes to the "PROGRAM" display, repeat the operations in steps 2 to 3.
Disc
Track
Step
number
number
number
PROGRAM
SOUND
MODE
VOL
PROGRAM
SOUND
MODE
VOL
6
PROGRAM
SOUND
MODE
VOL
PROGRAM
SOUND
MODE
VOL
Off (Continuous Play)
Disc
Track
Step
number
number
number
PROGRAM
SOUND
MODE
VOL
CD
CD
CD
CD
(back to the beginning)
CD