To Change The Fm Reception Mode - JVC CA-V888T Instructions Manual

6.
CAUTION: If the Unit is unplugged or if a power failure occurs, the preset stations will be erased
after a few days. If this happens, preset the station again.

To Change the FM Reception Mode

When an FM stereo broadcast is hard to receive or noisy, press the FM MODE button on the
FM MODE
Remote Control so that the "AUTO" indicator goes off in the display. Reception improves, but there
are no stereo effects. In this monaural mode, noise comes out while tuning in stations (since muting
is also cancelled).
To restore the stereo effect, press the FM MODE button on the Remote Control so that the "AUTO"
indicator lights up. In this stereo mode, no noise comes out while tuning in stations, and you can
hear stereo sounds when a program is broadcast in stereo.
18
Repeat steps 1 - 5 for each station you want to store in memory with a preset number.