Panasonic KX-TVS90 Installation Manual page 314

SYSTEM MANAGER'S GUIDE
example, to specify the mailbox range 1001 through 1209, enter 1001 in Step 5 and 1209
in Step 6.
Note
While the System Administrator programs via a personal computer, a System Report
will not be generated. The System Report starts to be generated after the System
Administrator has completed programming and system prompt [>] is displayed on the
personal computer.
Clearing the Reports
The Port Usage, Flash Memory Usage, Mailbox Usage, and Fax Call Reports can be cleared.
1.
Log in the Main Menu.
2.
Press [5] for the System Report Menu.
3.
Press [2] to clear the Flash Memory Usage Reports, [3] to clear the Port Usage Reports, [4]
to clear the Mailbox Usage Reports, or [8] to clear the Fax Call Report.
4.
Press [2] to clear the report. To clear the Mailbox Usage Reports, Go to Step 5.
5.
Type the mailbox number of the start of the range.
Note
If a [#] is entered in place of each digit of the mailbox numbers (e.g., # # # for 3-digit
mailbox numbers), reports for all mailboxes will be cleared and the System Report
Menu will appear. In this case, Step 6 can be skipped.
6.
Press [1] to specify the mailbox range, and Type the mailbox number of the end of the
range. Press [2] to clear all Mailbox Usage Reports.
314 Installation Manual