Utility Commands - Panasonic KX-TVS90 Installation Manual

SYSTEM MAINTENANCE AND TROUBLESHOOTING

7.2 UTILITY COMMANDS

In the Utility Command Mode, the System Administrator can access the functions described
below by entering the appropriate command at the "$" prompt, and Pressing RETURN.
To select the Utility Commands Menu, follow the menu path as shown:
System Administration Top Menu-3
Utility Command (Type 'HELP' for command list.)
$
OFLN:
ONLN:
PASS:
TIME:
PSET:
ELOG:
SAVE:
LOAD:
GPRN:
VERS:
CREP:
CCLR:
MWL:
MRL:
MPLT:
HELP:
QSET:
LMON:
PUTD:
WCID:
158
Sets the system to off-line mode
Sets the system to on-line mode
Sets the System Administrator's password
Sets the system clock, date, and time
Specifies the reports printing time
Displays device error log
Stores a backup of the program or data in the flash memory
Restores a backup of the program or data to the VPS
Displays all of the VPS parameters
Displays the version of the program
Displays the keypad assignments, message recording status and the
tree-structure of a Custom service
Clears a Custom service menu access count
Specifies the number of times the VPS attempts to turn on the message
waiting lamp on the extensions
Sets the minimum recording length of a message
Displays the user prompt recording status
Displays brief instructions and a list of Utility Commands
Set up your VPS roughly so that you can use it quickly
Line Monitor
Displays Touchtone Information
Wait for Caller ID
Table 28
Installation Manual