Panasonic KX-TVS90 Installation Manual page 271

Parameter
System Prompt
Selection
Number
User 1 Prompt
Selection
Number
User 2 Prompt
Selection
Number
Position of
"AM/PM" in
Time Stamp
for User 1
Prompt
Position of
"AM/PM" in
Time Stamp
for User 2
Prompt
Installation Manual
Value Range
(Default)
1-9 Assigns a selection number (1-9) to each prompt. Callers
(None) use the numbers to select the desired language for their
message prompts. This setting is required when either one
or both of the following parameters are set to "Selective".
Port Assignment—Incoming Call Service Prompt
Authorization of External Message Delivery—Prompt
Mode
Example:
For service in English, press (7).
For service in French, press (8).
For service in Chinese, press (9).
The Message Manager is responsible for recording this
Multilingual Selection Menu.
Note: The Prompt Selection Number should not match the
first digit of any mailbox number, because mailbox/
extension access is possible during and after the
Multilingual Selection Menu.
1. Before This parameter setting is functional only when User 1 or
2. After User 2 Prompts are in use. This parameter specifies the
3. 24-h following:
(User 1 Prompt:
After;
User 2 Prompt:
1. Before—the VPS announces "AM/PM" before the time
24-h)
2. After—The VPS announces "AM/PM" after the time
3. 24-h—the VPS announces the time in 24-h format (e.g.,
Note: When System Prompts are in use, the parameter is
set to "After".
SYSTEM ADMINISTRATOR'S GUIDE
Table 59
Description/Function
(e.g., P.M. 3:42).
(e.g., 3:42 P.M.).
15:42).
271