Technical Information; The Heat Pump's Factory Settings; Sensor Table - Bosch EHP 6-11 LW User And Installation Manual

Technical information

The heat pump's factory settings

This table indicates the factory settings for all the settings likely to be
changed by the fi tter.
Menu Factor y
1.1 temp. incr. / decr. +/-
1.2 Temp. Fine-tune
1.3 Fine-tune the heat curve
1.4 Heat curve hysteresis
1.5 Mix. valve incr/decr
1.6 Adjust. mix. valve
1.7 Fine tuning mix. valve curve
1.8 Mixing valve curve neutral zone
1.9 Max mixing valve curve at GT4
1.10 inst. Int. temp
1.11 Setting of room sensor
1.12 Setting holiday function
1.13 Remote control temperature
1.14 Summer disconnection setting
2.1 No of hours for add. hot water
2.2 Range for HW peak
2.3 Heating temp. setting
2.4 Setting of DHW hysteresis
4.1 Clock setting HP accord. to clock
4.1.1 Level of PAC setting +/-
4.2 Timer control settings for add. heat
4.3 Clock setting DHW accord. to clock
5.2 Select capacity of conn. for additional heat
5.4 Select function add. heat only
5.5 Select add. heat function
5.7 Select external control
5.10 Select P2 mode of funct.
5.11 Select P3 mode of funct.
8.1 Setting add. heat time
8.3.4 Ramp time open
8.3.5 Ramp time closed
9.4 Min. temp pump inlet
9.5 Min. temp. pump outlet

Sensor table

This table indicates the values of the sensor
resistors to different temperatures.
settings
4
0º
0º
5º
4
0º
0º
3º
60º
20º
5
0 day
Inactive
18º
0 hours
Inactive
52º
2º
Inactive
0º
Inactive
Inactive
2/3
OFF
yes
0
P2 running cont.
P3 with Compres.
60 minutes
20 min
3 min
-10º
-10º
74
Technical information
Temperature ( k
ºC)
-40 154,00
-35 111,700
-30 81,700
-25 60,400
-20 45,100
-15 33,950
-10 25,800
-5 19,770
0 15,280
5 11,900
10 9,330
15 7,370
20 5,870
25 4,700
30 3,790
35 3,070
40 2,510
45 2,055
50 1,696
55 1,405
60 1,170
65 0,980
70 0,824
75 0,696
80 0,590
85 0,503
90 0,430