Set The Time And Date - Bosch EHP 6-11 LW User And Installation Manual

Extra functions - Customer level 2
3. Turn the menu dial clockwise until you reach the menu Op. time
readings on HP and add. heat (menu 7).
4. Press the Select button and scroll through the menus using the menu
dial.
The number of hours the heat pump has been in
operation
The menu shows the number of hours that the heat pump has been in
operation since the day of installation.
The heat pump's hot water mode and heating
mode operations as a percentage
The menu shows the heat pump's allocation between hot water mode and
heating mode. The allocation is stated as a percentage.
The number of hours additional heat has been in
operation
The menu shows the number of hours additional heat has been in
operation since the day of installation.

Set the time and date

The heat pump has functions that are dependent on both the clock and
date. Thus, it is important that these are correct. This is how you access
the menu Clock, setting time and date:
1. Press the Heat button until Access = CUSTOMER2 is displayed.
2. Press the Menu button.
26
Main menu
Op. time readings
HP and add. heat 7
Return Select
Op. time readings
Add. heat in operat.
number of hours? 7.1
Return Select
Op. time readings
Distribution HP
DHW-Rad in % 7.2
Return Select
Op. time readings
Add. heat in operat.
number of hours? 7.3
Return Select