Control Panel; Controls And Status Lamps - Bosch EHP 6-11 LW User And Installation Manual

Control panel

Control panel
All settings are made from the control panel. It also displays heat production
statistics and information about different alarms. When you have made your
settings, the control panel makes sure they are saved in the control unit to
carry out your wishes.

Controls and status lamps

Power switch (ON/OFF)
You start and stop the heat pump using the power
switch button.
Lamp on: The heat pump is on.
Lamp fl ashes: The heat pump is off.
Alarm status
Lamp fl ashes: A fault has occurred in the heat
pump.
Lamp on: The alarm has been acknowledged, but
the fault remains.
Temp. incr. /
Temp. incr. / decr.
decr.
Pressing once gives a shortcut to the most frequent
temperature settings.
Info
Info
Pressing once gives continuous information about the
heat pump's and additional heat's operating conditions.
Menu
Menu
Press once to enter the main menu.
The main menu contains all setting menus and
temperature displays.
Status lamps
Power switch
(ON/OFF)
Menu display
040622 16:08:15 Ma
temp.
Menu buttons
12
Reg 637 K1
040622 16:08:15 Tu
temp. Info Menu
Rego 637 K1
Info Menu
Menu dial