Menu Outline For Basic Functions (Customer Level 1); Select Scrolling Information On The Menu Display - Bosch EHP 6-11 LW User And Installation Manual

Basic functions - Customer level 1

Menu outline for Basic functions (Customer level 1)

temp.
temp. +/-
Page 16
Temp. Fine-tune
Page 17
Room temperature
Page 18
Extra hotwater
Page 18
= The menu display is standard on all
heat pumps.
=
The menu display is only shown on
the heat pump in combination with an
extra sensor or for a specifi c model.

Select scrolling information on the menu display

If you press the Info button in the initial menu, you will receive continuous
information about the heat pump's operation and working temperatures.
This is what to do:
1. Press the Info button in the initial menu.
Here follows a few of the windows displayed:
Reg 637 K1
040622 16:08:15 Tu
Info Menu
Indoor temperature
settings
STANDBY
no rad heat required
Temperature settings
No need
Temp. incr. / decr.
for hot water mode
range
Page 15
HOT WATER MODE
Heat pump only
Adjust temp.
Page 15
range
HEATING Mode
HP and add. heat
Page 15
Heat rad required
Int. temp
Heat pump starts
in #### seconds
Page 15
Main menu Main menu
Adjusting the hot
1 water settings
Page 19
Hot water setting
Duration of
0-10 1.1
add. hot water 2.1
Page 16
Temp. settings
-10/+10 1.2
Page 17
Temp. settings
1.10
Page 18
14
Note
Each menu is numbered in the lower
right-hand corner; this indicates which
main display it is associated to.
Main menu
Monitor all
2 temperatures
Page 19
Temperature readings
Return radiator GT1
Temperature readings
Page 18
Out GT2
Temperature readings
Hot water GT3
Temperature readings
Shunt, fl ow GT4
Temperature readings
Room GT5
Temperature readings
Compressor GT6
Temperature readings
Heat trfl uid out GT8
Temperature readings
Heat tr fl uid in GT9
Temperature readings
Ht trfl d(coll)inGT10
Temperature readings
Httrfl d(coll)out GT11
Reg 637 K1
040622 16:08:15 Tu
temp. Info Menu
3
Page 19
Page 20