JVC CA-UXG200 Instructions Manual page 20

(2) Set the hour.
PRESET
(3) Set the minutes as the hour setting above.
You cannot set On time and Off time on the same time
setting.
4
Select the playback source.
(1) Proceed to the playback source setting.
(2) Select the playback source; "CD," "USB," or
"TUNER".
USB
MEMORY
CD
When you select "TUNER"
–1 Press to select "AM PRE" or "FM PRE",
4/x
then press TIMER.
–2 Press to select preset number, then press
4/x
TIMER.
5
Activate the Daily Timer.
TIMER
The (Timer) indicator on the display and TIMER
lamp on the main unit light.
17
TIMER
TIMER
FM/AM/
AUDIO IN
TIMER
6
Turn off the System.
To deactivate the Daily Timer
When the System is turned on...
TIMER
The (Timer) indicator on the display and the TIMER
lamp on the main unit go off.
• When both the Daily Timer and the Sleep Timer are
activated, the System is turned off at the earlier off-time.
How the Daily Timer works
Once the Daily Timer is set, the
lights on the display and the TIMER lamp on the main
unit lights red. The Daily Timer is activated at the same
time everyday until the timer is turned off manually.
When the on-time comes
The System turns on, tunes in to the specified station or
starts playing the specified source.
• The sound level is gradually turned up until the last
time you set. (Maximum Vol.16)
• While the Daily Timer is working, the
indicator flashes on the display.
• Without canceling the Daily Timer, you can change the
source or adjust the volume after the Daily Timer starts
playback.
When the off-time comes
The System stops playback and turns off (standby).
• The Daily Timer setting remains in memory until you
change it.
(Timer) indicator
(Timer)