JVC CA-UXG200 Instructions Manual page 17

(2) Select a track.
PRESET
PROG.
MP3 CD
4
Confirm the selection.
DISPLAY/
PROGRAM
Next program step is indicated.
PROG.
MP3 CD
Group number
5
Repeat steps 3 and 4 to program the other tracks.
6
Start playback.
USB
MEMORY
CD
or
The tracks you have selected are played back in the order
you have programmed.
To skip a track: To pause:
PRESET
To release, press
again.
• You cannot select the track with the number buttons during
Program Play.
Track number
Program step
To stop:
CD STOP
or
USB
MEMORY
To check the programmed contents
While the PROG. indicator lights up on the display and
playback is stopped...
DISPLAY/
PROGRAM
To modify the program
While the PROG. indicator lights up on the display and
playback is stopped...
Edit:
1 Press DISPLAY/PROGRAM repeatedly until the
program step you want to edit is displayed.
2 Perform the steps 3 and 4 on pages 13 and 14.
To add step in the program:
1 Press DISPLAY/PROGRAM repeatedly until "00" is
displayed.
2 Perform the steps 3 and 4 on pages 13 and 14.
To erase entire program:
STOP
The PROG. indicator goes off.
Program contents are also erased in the following cases:
• When you open the CD door while the source is disc.
• When you disconnect the USB mass storage class device
while the source is USB mass storage class device.
• When you start Random Play.
• When you change the source.
• When you turn off the System.
14