JVC CA-UXB70 Instructions Manual page 29

First Track Recording
First Track Recording allows you to record the first track of
each loaded disc.
1
Insert a recordable cassette into the cassette
compartment with the exposed part of the
tape facing left.
2
Load discs into the 5-CD Changer.
• If the current playing source is not the CD player, press
3/8 CD, then 7 before going to the next step.
3
Select the disc number you want to start
recording with.
On the remote control:
Press DISC UP or
DOWN.
On the unit:
Press DISC SELECT repeatedly.
4
Press CD REC MODE on the remote
control to select "1ST TRACK."
Each time you press the button, the recording
mode changes as follows:
1 CD ALL CD
1 2 3 4 5
CD
5
Press REC while "1ST TRACK" still
remains on the display.
The indicator lights up on the display and
REC
recording starts.
• Make sure to press the button before "1ST TRACK"
goes off; otherwise, recording will start in the All Discs
Synchronized Recording mode (see page 25).
1 2 3 4 5
CD
Elapsed playing time
DISC UP
DISC
DISC DOWN
DISC
SELECT
CD
CD REC
MODE
1ST TRACK
REC
REC
When the first track of the selected disc is recorded, the first
track of the next disc will be recorded.
First Track Recording will stop after all the first tracks on the
loaded discs are recorded.
Both the 5-CD changer and the cassette deck stop
automatically.
To stop while recording, press 7.
The tape stops after 4 seconds.
To remove the cassette, press 0 on the unit.
You cannot exchange a disc while recording another disc.
Pressing CD REC MODE changes the disc playback mode to
Continuous Play and cancels the Repeat Play mode.
One Track Recording
This recording method is convenient when you record tracks
during play. You can record just the track you want.
1
Insert a recordable cassette into the cassette
compartment with the exposed part of the
tape facing left.
2
Press REC while playing the track
you want to record.
The playback of the track is stopped, and the
same track starts playing from the beginning.
This time, the cassette deck starts recording the track.
• After the track is recorded, both the 5-CD changer and
the cassette deck stop automatically.
To stop while recording, press 7.
The tape stops after 4 seconds.
To remove the cassette, press 0 on the unit.
REC
26