Playing At Random-Random Play - JVC CA-UXB70 Instructions Manual

4
Press the number buttons to
select a track from the disc
selected in the above step.
• For how to use the number buttons, see
"To go to another track directly using the
number buttons" on the previous page.
Track number
1 2 3 4 5
CD PRGM
5
Program other tracks you want.
• To program tracks from the same disc, repeat step 4 .
• To program tracks from a different disc, repeat steps 3
and 4 .
6
Press 3/8 CD.
The tracks are played in the order you have
programed.
To stop during play, press 7.
To exit from the Program Play mode, before or
after play, press PLAY MODE once or twice so
that the unit enters another disc playback mode
(Random Play or Continuous Play).
The PRGM indicator goes off.
• Turning off the unit also cancels Program Play and changes
the disc playback mode to Continuous Play.
To check the program contents
Before playing, you can check the
program contents by pressing ¢ or
4.
• ¢: Shows the programed tracks in the programed order.
• 4: Shows them in the reverse order.
• Pressing 4 first time after you have programed
shows the first track in the program.
To modify the program
Before playing, you can erase the last programed
track by pressing CANCEL.
Each time you press the button, the last
programed track is erased from the program.
To add tracks to the program before playing, simply select
disc numbers and track numbers you want to add by
following steps 3 and 4 .
1 2
4 5
7 8
10
Total playing time
3/8
CD
PLAY
MODE
CANCEL
3
6
In the Program Play mode, you cannot open the disc trays regardless
9
of the source currently selected. In this case, change the source to
the CD player, then press PLAY MODE while playback is stopped
+10
before opening a disc tray.
If you try to program a 33rd track
"MEMORY FULL" will appear on the display.
When "NO PROGRAM" appears on the display
• You are trying to program a track from an empty tray, or a track
number that does not exist on the disc.
• You are selecting the disc that the unit has not read yet.
If the total playing time exceeds 100 minutes
The total playing time on the display will not be shown. "– – : – –"
will appear.
Playing at Random—Random Play
The tracks of all loaded discs will play at random.
On the remote control ONLY:
1
Load discs into the 5-CD Changer.
• If the current playing source is not "CD," press
3/8 CD, then 7 before going to the next step.
2
Press PLAY MODE repeatedly until
"CD RANDOM" appears on the
display.
The RANDOM indicator also lights on the
display.
RANDOM indicator
1 2 2 3 4
CD RANDOM
• Each time you press the button, play mode changes as
follows:
CD PROGRAM
(Program Play)
Standard display
(Continuous Play)
3
Press 3/8 CD.
The tracks are played at random.
Random Play stops when all the tracks are
played once.
To stop during play, press 7.
• Opening a disc tray also stops and cancels
Random Play.
To skip the current track, press ¢.
• The 4 button does not work during Random
Play.
Continued
5
CD RANDOM
(Random Play)
PLAY
MODE
3/8
CD
20