Fuel/Water Hose Routing - Suzuki DF 90 Service Manual

FUEL/WATER HOSE ROUTING


• Do not over-bend (kink) or twist hoses when installing.
• When installing hose clips, position tabs to avoid contact with other parts.
• Check that hoses do not contact rods and levers during either engine operation or standstill.
• Extreme care should be taken not to cut, abrade or cause any other damage on hoses.
• Care should be taken not to cause hoses to be compressed excessively by any clamp when fitted.
Fuel hose/Protector
(3-way joint to Fuel
delivery pipe)
Fuel hose
(Low pressure fuel pump
to Fuel vapor separator)
Fuel return pipe
Water hose
to Water return pipe
Water hose
from Fuel return pipe
from Crankcase upper
Water hose
(Intake manifold
to 3-way joint )
to Pilot water tube
Water hose
(3-way joint
Clamp
High pressure . fuel filter
Water hose
Water hose
to Intake monifold)
to Crankcase lower
from Engine holder
Evaporation hose (Fuel vapor separator to Cylinder head cover)
Clamp: Fix fuel house and water hose.
High pressure fuel filter
Fuel vapor separator
from 3-way joint
3-way joint
3-way joint
DF100 "K9" ('09) MODEL 19-25
to Fuel delivery pipe
from Low pressure
fuel pump
3-way joint
Fuel vapor separator
Water hose
(3-way joint to
Fuel return pipe)
Fuel hose/Protector
(Fuel return pipe to Fuel
vapor separator)