Anodes And Bonding Wires - Suzuki DF 90 Service Manual

2-18 PERIODIC MAINTENANCE

ANODES AND BONDING WIRES

Inspect every 50 hours (3 months).
ANODES
If 2/3 of zinc anode has corroded away, replace anode.
The anode should be periodically cleaned with a wire brush to
ensure maximum effectiveness.
Never paint the anode.
NOTE:
The anode securing bolt should be covered with Suzuki Sili-
cone Seal.
99000-31120 : Suzuki Silicone Seal
BONDING WIRES
• If breakage or other damage is found on bonding wire, re-
place wire.
• If rust, corrosion or other damage is found on terminal, clean
with cleaning solvent or replace wire.
Anode