Instructions For Installation And Connection Of The Unit; Characteristics Of The Location - York YLCA Technical Information

1 Technical Information

1.11 Instructions for installation and connection of the unit

1.11 Instructions for installation and connection of the unit

1.11.1 Characteristics of the location

Before locating the unit, make sure you have received the appropriate product by checking the specifi‐
cations described on the outside of same.
The unit should be placed on a perfectly horizontal plane, making sure the base can support the weight
of the unit.
If vibration-free operation is required, the unit can be placed on a cork or similar anti-vibratory base, or
fastened to the base with anti-vibratory plates or supports.
Location of various units
Avoid recirculation of air between units.
OK
NO
42