Technical Information
1
Measurements, clearances and accesses
1.7
1.7 Measurements, clearances and accesses
1.7.1 Clearances
When installing each unit, clearances should be left for:
1 Air inlet and discharge.
2 Maintenance servicing.
3 Power supply connections.
To operate correctly, all minimum clearances shown on the general dimension diagrams should be re‐
spected, with regard to the possible obstruction of air circulation or of the work of an operator.
Minimum technical clearance YLCA 5, 7, 9, 12 and 15
600
300
N O T E
Distances in millimetres
25