Using Sleep Timer; Timer Priority - JVC CA-MXGA77 Instructions Manual

Compact component system
Hide thumbs Also See for CA-MXGA77:
Table of Contents

Advertisement

To turn on or off Recording Timer after its setting is
done
1 Press CLOCK/TIMER repeatedly
until "REC" appears on the display.
2 To turn off the Recording Timer,
press CANCEL/DEMO.
The REC (recording timer) indicator
goes off from the display ("OFF" appears for a while).
The Recording Timer is canceled, but the setting for the
Recording Timer remains in memory until you change it.
To turn on the Recording Timer,
press SET.
The REC (recording timer) indicator
lights up on the display. The settings you have done are
shown on the display in sequence for your confirmation.

Using Sleep Timer

With Sleep Timer, you can fall asleep to music.
You can set Sleep Timer when the unit is turned on.
How Sleep Timer actually works
The unit automatically turns off after the specified time
length passes.
On the remote control ONLY:
1
Press SLEEP.
The time length until the shut-off time appears
and the SLEEP indicator starts flashing on the
display.
• Each time you press the button, the time length changes
as follows:
SLEEP10
SLEEP20
SLEEP120
OFF
(Canceled)
2
Wait for about 3 seconds after specifying the
time length.
The SLEEP indicator stops flashing and remains lit.
To check the remaining time until the shut-off time, press
SLEEP once so that the remaining time until the shut-off time
appears for about 3 seconds.
To change the shut-off time, press SLEEP repeatedly until
the desired time length appears on the display.
To cancel the setting, press SLEEP repeatedly until "OFF"
appears on the display so that the SLEEP indicator goes off
from the display.
• Sleep Timer is also canceled when you turn off the unit.
CLOCK
/ TIMER
CANCEL
/ DEMO
SET
SLEEP30
SLEEP60
SLEEP90

Timer Priority

Since each timer can be set separately, you may wonder what
happens if the setting for these timers overlaps.
Here are some examples.
• Recording Timer has priority over Daily Timer.
If Recording Timer is set to come on while Daily Timer is
operating, Daily Timer is canceled and Recording Timer
start working.
AM 6:00
Recording Timer
Daily Timer
• If Sleep Timer overlaps with another timer (either Daily
Timer or Recording Timer), a timer with the earlier shut-off
time has priority.
AM 6:00
Sleep Timer
Recording Timer
When using the Recording Timer and Sleep Timer at the
same time, pay special attention to the shut-off time.
7:30
6:30
7:00
canceled.
6:30
7:00
7:30
canceled.
28

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ca-mxgt88

Table of Contents